II (SRM, SLM) stop I (ARM) 785 No-load current, motor d invalid Cause The no-load current (P1136) of the motor (ARM) is incorrect (less than/ equal to zero). Current setpoint filter 1: P1212 2 * P1210 Current setpoint filter 2: P1215 2 * P1213 Current setpoint filter 3: P1218 2 * P1216 Current setpoint filter 4: P1221 2 * P1219 Speed setpoint filter 1: P1516 2 * P1514 Speed setpoint filter 2: P1519. The cause is probably a hardware fault on the control mod- ule.
Msr code reduction
Medicare will make payment only when a service is accepted as effective and proven. Magnetic stripe cards are used in very high volumes in the mass transit sector, replacing paper based tickets with either a directly applied magnetic slurry or hot foil stripe. 2 The number of axes configured in the master is not equal to the number axes for which the profibus-DP option module is actively switched via P0875. Acknowledgement not required Stop response stop VII 808 Reference point not set Cause When starting a traversing block, a reference point is not set. Remedy if P10751 Increase current via P1019 Check armature inductance (P1116) and if required, increase Check the connecting cable, motor/drive converter (phase missing) Check the motor contactor DC link voltage present? Remedy Harmonize the encoder pulse number of the motor measuring system in P1005 to the encoder used. Supplementary info: X Cause An error occurred when loading the user data from the memory mod- ule. 4 No PPO type detected (only for P875 2).